×
Your cart is empty.
Contact us on 01283 763666
Email:sales@campercare.co.uk

Shop

Filter

Showing 13–24 of 87 results

View 12 24 All

Sort By
Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets
  • Supercharger 50 AMP Battery Charger

    Supercharger 50 AMP Battery Charger

    Supercharger 50 AMP Battery Charger

    THE REVOLUTIONARY SUPERCHARGER 12 VOLT DC PETROL CHARGER IS HERE WEIGHS JUST 11.5 KGS. MEASURES JUST 45cm ( 17.5" ) Long   38cm ( 15" ) High   25cm ( 10" ) Wide SUPERLIGHT WEIGHT SUPER SMALL SUPER QUIET How to Use: The SUPERCHARGER has been developed for complete ease of use giving the user a portable and safe efficient method of recharging 12 volt batteries in the minimum time period. Automotive alternators have proved themselves over decades to be robust and reliable over thousands of miles. You cannot overcharge and damage a battery using the SUPERCHARGER as the in built charge controller only allows the maximum amount of current that the battery will accept safely. Operating the SUPERCHARGER is so easy.... 1, Connect the booster leads to the SUPERCHARGER unit FIRST then to the battery terminals RED + POSITIVE & BLACK - NEGATIVE *. Switch the power switch to ON and you will see the ammeter illuminate ( 50 AMP ONLY) or the RED charging light illuminate ( 95 AMP ) this checks the internal fuse etc are working correctly, SWITCH THE POWER SWITCH BACK TO THE OFF POSITION. 2, Set the engine switch to ON, switch on the fuel and close the choke on the engine, adjust the engine throttle to approximately 1/4 throttle. 3. Ensure the power switch on the control box is set to OFF. 3 Firmly and sharply pull the starter handle and allow the engine to run for a few seconds before returning the choke position to the open position. 4. Once running smoothly adjust the revs to approximately 2/3rds then switch the power switch to ON. ( Note the ammeter illumination should extinguish (50 amp) or the red charger lamp extinguish on the 95 amp. 5. The ammeter needle should move ( 50 amp only ) and the engine revs drop as the alternator produces power and comes under load. 6. Adjust the engine throttle to reduce the revs to a position that the engine operates smoothly and as quietly as possible. 7. The SUPERCHARGER is now charging your battery, the SUPERCHARGER will monitor your battery condition and put in the maximum number of amps that your battery requires. 8. When finished switch off, disconnect the leads and put the SUPERCHARGER away for next time. * THE ABOVE IS NOT INTENDED AS AN IN DEPTH OPERATING GUIDE, FULL COMPREHENSIVE INSTRUCTIONS AND HEALTH AND SAFETY INFORMATION ACCOMPANYS THE SUPERCHARGER UNIT AND MUST BE ADHERED TO. In our accessory section you will find booster leads that do not require to be disconnected each time, they are fitted with a quick release mechanism that allows for swift hassle free connection. The SUPERCHARGER has been specifically designed with reliability and ease of use in mind, take for example the control box, this has been constructed to be rugged eliminating flimsy circuit boards, silicon chips etc that can easily fail, the SUPERCHARGER utilises proven heavy duty switch gear and instrumentation to give you complete peace of mind.
    £579.00
  • SUPERSUN DRL ( Daytime Running Lights ) THE BRIGHTEST AVAILABLE

    SUPERSUN DRL ( Daytime Running Lights ) THE BRIGHTEST AVAILABLE

    SUPERSUN DRL ( Daytime Running Lights ) THE BRIGHTEST AVAILABLE

    SUPERSUN UNIVERSAL DRL KIT... seeing is believing ! THE BRIGHTEST DRL KIT AVAILABLE.

    UNIVERSAL FITTING FOR DUCATO, RELAY, JUMPER, TRANSIT, MERCEDES, VW, RENAULT ETC WE GUARANTEE OUR PRODUCTS... IF YOU ARE NOT TOTALLY SATISFIED WITH THIS KIT WE WILL REFUND YOUR PURCHASE PRICE WITHOUT QUESTION.

    DO NOT CONFUSE OUR SET WHICH WE SOURCE AND ASSEMBLE OURSELVES WITH ANY OF THE OTHER INFERIOR SETS AVAILABLE. YOU WILL BE TOTALLY ASTONISHED BY HOW BRIGHT AND SIMPLE TO FIT OUR 'SUPERSUN' SET IS. KIT HAS EVERYTHING YOU NEED TO FIT. UNDOUBTEDLY THE BRIGHTEST DRL SET AVAILABLE, SIMPLE TO FIT, NO LARGE HOLES TO DRILL OR CUT OUT, CAN BE FITTED USING THE 'SUPER BOND' SELF ADHESIVE PADS ( SUPPLIED ) OR THE SCREW IN STUDS ( SUPPLIED ).

    FULLYWATERPROOF.

    COMES COMPLETE WITH SWITCH MODULE THAT AUTOMATICALLY SWITCHES THE LIGHTS ON/OFF WITH THE IGNITION AND COMPLIES WITH EU LEGISLATION TO SWITCH THE DRLs OFF WHEN THE HEADLAMPS ARE SWITCHED ON.

    CHECK OUT THE SPECIFICATIONS BELOW. MACHINED ALUMINIUM NOT CHEAP PLASTIC or STEEL. MAGNIFIED BULLS EYE LENS 55mm DIAMETER 25mm DEEP  (picture 2 ) 30MM  9w SUPER BRIGHT COB CHIP ... THE VERY LATEST LED CHIP. ( picture 3 & 4) FULLY WATERPROOF VOLTAGE REGULATED FOR LONG LIFE ( picture 5 ) EU CONFORMING SWITCH MODULE C/W WIRING HARNESS ( picture 6 ) PIGGY BACK FUSE SPUR ... SIMPLICITY TO INSTALL ( picture 7 ) BULLET CONNECTORS FOR CONVENIENCE SUPER BOND SELF ADHESIVE PADS & SCREW IN STUDS ( picture 8 ) FULL SIMPLE TO UNDERSTAND AND EASY TO FOLLOW STEP BY STEP INSTRUCTIONS. Wiring: RED to IGNITION live+ USING PIGGY BACK FUSED SPUR ( supplied ) BLACK to EARTH - WHITE to REAR OF HEADLAMP USING SPLICED CONNECTOR (supplied ) BULLET CONNECTOR LEADS TO DRL UNITS. ITS AS SIMPLE AS THAT!! SUPERSUN KIT COMPRISES 2 x  WATERPROOF MACHINED ALUMINIUM HIGHEST OUTPUT DRL LED LAMPS 2 x SUPERBOND SELF ADHESIVE PADS 2 x MACHINE STUD SCREWS C/W NUTS 1 x SWITCH MODULE (* With auto on/off when the headlamps are switched on ) complete with wiring loom. 1 x SPLICE CONNECTOR 1 x PIGGY BACK FUSED SPUR 1 x FULL SET INSTRUCTIONS * The AUTO on/off function can be disconnected to allow the DRL lamps to remain on. THESE REALLY ARE SIMPLE TO INSTALL, THE HIGH STRENGTH SELF ADHESIVE OR THE SCREW STUDS MAKE THESE TRULY A UNIVERSAL  DRL KIT. FOR MORE LED BULBS & LIGHTING SEE OUR OTHER LISTINGS AND SEE THE IMAGES ABOVE FOR CATALOGUE REFERENCE.
    £59.99
  • T5F13 REPLACEMENT LED TUBE 21″….. NO MODIFICATION REQUIRED EXCLUSIVE

    T5F13 REPLACEMENT LED TUBE 21″….. NO MODIFICATION REQUIRED EXCLUSIVE

    T5F13 REPLACEMENT LED TUBE 21″….. NO MODIFICATION REQUIRED EXCLUSIVE

    DIRECT REPLACEMENT FOR 21" FLUORESCENT TUBE

    NO MODIFICATION REQUIRED...WORKS WITH EXISTING BALLAST UNIT

    A STANDARD FLUORESCENT TUBE USES APPROX 2.5xTHE POWER CONSUMPTION

    Specifications. EXCLUSIVE TO US... DESIGNED AND MANUFACTURED TO OUR REQUIREMENTS.

    VOLTAGE : WORKS WITH 12 VOLT FLUORESCENT LAMPS...NOT SUITABLE FOR GERMAN HYMER GROUP ( HYMER, BURSTNER NEISMANN BISCHOFF, FLAIR, GEIST )

    NUMBER OF SMD : 60 day white

    LIGHT OUTPUT : 45 watts ( approx 1.5x the light output of a conventional fluorecent tube )

    POWER CONSUMPTION : 5.4 Watt

    DIMENSIONS : Max L 530mm 21" ( end of pin to end of pin )

    £21.00
  • T5F8 REPLACEMENT LED TUBE 12″….NO MODIFICATION REQUIRED EXCLUSIVE

    T5F8 REPLACEMENT LED TUBE 12″….NO MODIFICATION REQUIRED EXCLUSIVE

    T5F8 REPLACEMENT LED TUBE 12″….NO MODIFICATION REQUIRED EXCLUSIVE

    DIRECT REPLACEMENT FOR 12" FLUORESCENT TUBE

    NO MODIFICATION REQUIRED...WORKS WITH EXISTING BALLAST UNIT

    A STANDARD FLUORESCENT TUBE USES OVER 2.5 X THE POWER CONSUMPTION.

    Specifications. EXCLUSIVE TO US... DESIGNED AND MANUFACTURED TO OUR REQUIREMENTS.

    VOLTAGE : WORKS WITH 12 VOLT FLUORESCENT LAMPS...NOT SUITABLE FOR GERMAN HYMER GROUP ( HYMER, BURSTNER NEISMANN BISCHOFF, FLAIR, GEIST )

    NUMBER OF SMD : 30 day white

    LIGHT OUTPUT : 35 watts ( approx 1.5x the light output of a conventional flourescent tube )

    POWER CONSUMPTION : 3.5 Watt

    DIMENSIONS : Max L 300mm 12" ( end of pin to end of pin )

    £16.99
  • G4 6SMD HORIZONTAL

    G4 6SMD HORIZONTAL

    G4 6SMD HORIZONTAL

    DIRECT REPLACEMENT FOR THE 10 WATT G4 Bi PIN HORIZONTAL FITTING HALOGEN BULB

    Specifications.

    VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )

    NUMBER OF SMD : 6

    LIGHT OUTPUT : 18 watts

    POWER CONSUMPTION : 1 Watt

    DIMENSIONS : Max W 25mm

    £5.50
  • GU10 240 VOLT 60 smd

    GU10 240 VOLT 60 smd

    GU10 240 VOLT 60 smd

    DIRECT REPLACEMENT 240 VOLT GU10 DOWNLIGHTER BULB

     AVAILABLE IN COOL WHITE AND WARM WHITE - NON DIMMABLE

    Specifications.THIS IS THE MOST POPULAR REPLACEMENT BULB FOR 50 WATT HALOGEN BULBS IN KITCHENS BATHROOMS ETC

    VOLTAGE : 220 - 240 VOLT

    NUMBER OF SMD : 60

    LIGHT OUTPUT : 52 WATTS

    POWER CONSUMPTION : 4 Watt

    DIMMABLE : NO

    DIMENSIONS : Max W 50mm

    £4.49
  • LADDER GUARD / CLIMB STOPPER

    LADDER GUARD / CLIMB STOPPER

    LADDER GUARD / CLIMB STOPPER

    EXCLUSIVE TO US

    CLIMB STOPPER REAR LADDER GUARD. STOPS RISING CRIME

    THIS UNIVERSAL FITTING* UNIT IS DESIGNED TO DETER UNAUTHORISED PERSONS FROM SCALING THE REAR LADDER AND ACCESSING THE ROOF OF THE MOTORHOME.

    IT IS A SAD FACT THAT IN TODAYS SOCIETY MOTORHOMES ARE INCREASINGLY BEING TARGETED BY THIEVES DUE TO POSSESSIONS BEING LEFT INSIDE. WITH LARGER ROOFLIGHTS NOW BEING USED, ACCESS THROUGH THESE HAS BECOME EASIER. STOP UNWANTED CHILDREN CLIMBING ON TO THE ROOF, PROTECT TOP BOXES, PREVENT " GAS ATTACKS" ETC,ETC.

    THE CAMPERCARE "CLIMB STOPPER"LADDER GUARD IS SIMPLE TO FIT, SIMPLY HOOK OVER UPPER LADDER RUNG, ADJUST THE MIDDLE SLIDING BRACKET AND LOCK IN POSITION. ONCE ADJUSTED TO YOUR LADDER NO OTHER ADJUSTMENTS ARE NECESSARY. A VISIBLE DETERENT TO UNAUTHORISED PERSONS.

    SPECIFICATIONS. * Manufactured from tough, weatherproof, easy clean, white coated aluminium/sandwich board.

    light and strong Universal fitting. Heavy Duty Aluminium top rung hook Comes complete with stainless steel fittings. galvanized steel nuts and bolts.. Red reflective tape. Complete with padlock and 2 keys. Size: 95cm Long x 25cm Wide . *Fits ladders with rungs up to 35cm apart.Simple to remove (with key) when required, needs no additional resetting. No drilling or modification needed to the ladder.
    £49.99
  • SSG BRUSHED STEEL SPOT 12v  12SMD

    SSG BRUSHED STEEL SPOT 12v 12SMD

    SSG BRUSHED STEEL SPOT 12v 12SMD

    BRUSHED STEEL SURFACE MOUNTED LED LAMP C/W 12 SMD BULB

    Specifications.

    VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )

    NUMBER OF SMD : 12

    LIGHT OUTPUT : 25 watts

    POWER CONSUMPTION : 1.2 Watt

    SWITCH : YES

    MOUNTING : SURFACE

    ROTATION : 360 / 90 up/down

    DIMENSIONS OF LAMP : Max W BASE 60mm

    MAX H 100mm

    £20.99
  • BONNET STONE CHIP PROTECTOR BONNET BRA  2006 – 2014

    BONNET STONE CHIP PROTECTOR BONNET BRA 2006 – 2014

    BONNET STONE CHIP PROTECTOR BONNET BRA 2006 – 2014

    AVAILABLE IN BLACK ONLY

    VEHICLE MODEL :- FIAT DUCATO, PEUGEOT BOXER, CITROEN RELAY

    SUITABLE FOR 2006 - 2014 ( X250 ) Motorhomes, Vans, Pickups etc (NOT 2014 -  FACE LIFT)

    NOT ONLY GIVES FANTASTIC BONNET PROTECTION FROM STONECHIPS, ROAD TAR, SUN, HAIL AND ALL OTHER ENVIROMENTAL ELEMENTS...... BUT THEY LOOK SUPERB !!

    AVAILABLE IN 3 COLOURS, BLACK, WHITE & SILVER.

    PROTECT YOUR INVESTMENT, EASY & SIMPLE TO FIT USING ELASTIC STRAPS AND CLIPS ON THE UNDERSIDE OF THE BONNET, NEEDS NO TOOLS.

    MANUFACTURED FROM A TOUGH STRONG VINYL WITH A FLEECY LINING TO ABSORB IMPACTS, ESPECIALLY MANUFACTURED AND TAILORED TO FIT THE MODELS LISTED.

    £49.99
  • MICRO BRUSHED STEEL 12v 6smd

    MICRO BRUSHED STEEL 12v 6smd

    MICRO BRUSHED STEEL 12v 6smd

    BRUSHED STEEL SURFACE MOUNTED LED LAMP CW 12 SMD BULB

    Specifications.

    VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )

    NUMBER OF SMD : 6

    LIGHT OUTPUT : 18 watts

    POWER CONSUMPTION : 1 Watt

    SWITCH : YES

    MOUNTING : SURFACE

    ROTATION : 360 / 90 up/down

    DIMENSIONS OF LAMP : Max W BASE 40mm

    MAX H 100mm

    £19.99
  • CREE 1 BRUSHED 12v 1x SUPER CREE

    CREE 1 BRUSHED 12v 1x SUPER CREE

    CREE 1 BRUSHED 12v 1x SUPER CREE

    BRUSHED STEEL SURFACE MOUNTED LED LAMP CW 1x SUPER BRIGHT CREE BULB

    Specifications. VOLTAGE : 12 NUMBER OF SMD : 1 x SUPER CREE cool white LIGHT OUTPUT : 25 watts POWER CONSUMPTION : 1.2 Watt SWITCH : YES MOUNTING : SURFACE ROTATION : 360 / 90 up/down DIMENSIONS OF LAMP : Max W BASE 60mm MAX H 100mm
    £21.99
  • 240 VOLT GENERAL BULB 28smd

    240 VOLT GENERAL BULB 28smd

    240 VOLT GENERAL BULB 28smd

    DIRECT REPLACEMENT FOR BAYONET AND SCREW IN CANDLE BULBS

    DIRECT REPLACEMENT 240 VOLT CANDLE BULB.

    AVAILABLE IN B22 Bayonet, E27 Large Screw & E14 Small Screw

    Specifications. VOLTAGE : 220 - 240 VOLTS NUMBER OF SMD : 28 LIGHT OUTPUT : +/- 45 Watts POWER CONSUMPTION : 4 Watt DIMMABLE : NO DIMENSIONS : Max Height from contacts 125mm Max Width 40mm
    £4.89