REAR COLLISION PREVENTER LED FLASHER UNIT
£10.99
REAR COLLISION PREVENTER.
A SUPERB SIMPLE DEVICE THAT INSTANTLY DRAWS ATTENTION TO FOLLOWING VEHICLES THAT YOU ARE STOPPING.
EASY TO INSTALL…. THE SMALL UNIT (4CM X 2.5CM X1CM) WIRES TO YOUR HIGH LEVEL LED BRAKE LAMP. WHEN YOU PUSH THE BRAKE PEDAL YOUR HIGH LEVEL BRAKE LAMP RAPID FLASHES FOR APPROX 5 FLASHES THEN REMAINS ON AS NORMAL .
WIRING IS SIMPLE, THE SMALL PLASTIC BOX IS CONNECTED TO THE TWO WIRES LEADING TO YOUR HIGH LEVEL BRAKE LAMP…. AND THATS IT DONE!!
HAS NO EFFECT ON CANBUS ELECTRICAL SYSTEMS
REAR COLLISION PREVENTER.
A SUPERB SIMPLE DEVICE THAT INSTANTLY DRAWS ATTENTION TO FOLLOWING VEHICLES THAT YOU ARE STOPPING.
EASY TO INSTALL…. THE SMALL UNIT (4CM X 2.5CM X1CM) WIRES TO YOUR HIGH LEVEL LED BRAKE LAMP. WHEN YOU PUSH THE BRAKE PEDAL YOUR HIGH LEVEL BRAKE LAMP RAPID FLASHES FOR APPROX 5 FLASHES THEN REMAINS ON AS NORMAL .
WIRING IS SIMPLE, THE SMALL PLASTIC BOX IS CONNECTED TO THE TWO WIRES LEADING TO YOUR HIGH LEVEL BRAKE LAMP…. AND THATS IT DONE!!
HAS NO EFFECT ON CANBUS ELECTRICAL SYSTEMS
Additional information
| Weight | 0.3 kg |
|---|
EYEBALL RECTANGLE BRASS
BRASS EYEBALL LED LAMP C/W 6 SMD BULB
Specifications. VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications ) NUMBER OF SMD : 6 LIGHT OUTPUT : 18 watts POWER CONSUMPTION : 1 Watt SWITCH : YES MOUNTING : RECESS ( 25mm D reqd ) ROTATION : YES DIMENSIONS OF LAMP : Max L 120mm MAX W 70mm
LADDER GUARD / CLIMB STOPPER
EXCLUSIVE TO US
CLIMB STOPPER REAR LADDER GUARD. STOPS RISING CRIME
THIS UNIVERSAL FITTING* UNIT IS DESIGNED TO DETER UNAUTHORISED PERSONS FROM SCALING THE REAR LADDER AND ACCESSING THE ROOF OF THE MOTORHOME.
IT IS A SAD FACT THAT IN TODAYS SOCIETY MOTORHOMES ARE INCREASINGLY BEING TARGETED BY THIEVES DUE TO POSSESSIONS BEING LEFT INSIDE. WITH LARGER ROOFLIGHTS NOW BEING USED, ACCESS THROUGH THESE HAS BECOME EASIER. STOP UNWANTED CHILDREN CLIMBING ON TO THE ROOF, PROTECT TOP BOXES, PREVENT " GAS ATTACKS" ETC,ETC.
THE CAMPERCARE "CLIMB STOPPER"LADDER GUARD IS SIMPLE TO FIT, SIMPLY HOOK OVER UPPER LADDER RUNG, ADJUST THE MIDDLE SLIDING BRACKET AND LOCK IN POSITION. ONCE ADJUSTED TO YOUR LADDER NO OTHER ADJUSTMENTS ARE NECESSARY. A VISIBLE DETERENT TO UNAUTHORISED PERSONS.
SPECIFICATIONS. * Manufactured from tough, weatherproof, easy clean, white coated aluminium/sandwich board.
CREE FLEX LG BRUSHED STEEL RECESSED 12v CREE
BRUSHED STEEL RECESSED MOUNTED LED LAMP CW 1 x SUPER BRIGHT CREE BULB
Specifications. VOLTAGE : 12 NUMBER OF SMD : 1 x SUPER BRIGHT CREE cool white LIGHT OUTPUT : 27 watts POWER CONSUMPTION : 1.3 Watt SWITCH : YES MOUNTING : RECESSED, DESIGNED TO FIT UNDER CUPBOARD OR REPLACE DOWNLIGHTER ETC ROTATION : 360 / 90 up/down DIMENSIONS OF LAMP : HOLE SIZE 50mm W BASE 70mm MAX H 200mm adjustable
EXTERIOR CRYSTAL AWNING LAMP 12v
CRYSTAL LENS AWNING LAMP C/W 9 SMD BULB
YOU ARE PURCHASING 1 X LED AWNING/ EXTERIOR LIGHT. CRYSTAL LENS/ WHITE COLOUR. SEE OUR OTHER LISTINGS FOR FULL AND COMPREHENSIVE RANGE MORE LIGHT THAN EVER BEFORE. JUST ARRIVED THESE NEW 12 VOLT SUPA BRIGHT LED REPLACEMENT AWNING LIGHTS GIVE OFF APPROX 25 WATTS LIGHT USING LESS THAN 1.2 WATTS POWER ( USING OUR G4 BULB ). THEY CAN BE USED AS DIRECT REPLACEMENTS FOR THE AWNING/ EXTERIOR LAMPS AS FITTED IN MOST MOTORHOMES CARAVANS AND BOATS. EACH LIGHT IS MANUFACTURED FROM QUALITY MATERIALS, A CRYSTAL LENS AND CABLE WITH SPADE CONNECTORS WHATS MORE THEY ALSO HAVE BUILT IN DRIVERS THAT ENABLE THEMTO WITHSTAND VOLTAGE CHANGES THAT RAPIDLY DIMINISH THE LIFE
OF CONVENTIONAL LED BULBS.
THESE LED UNITS GIVE OFF VIRTUALLY NO HEAT, ARE VIBRATION RESISTANT AND CAN LAST WELL IN EXCESS OF 35000 HRS, A BUILD QUALITY THAT SURPASSES EVERYTHING WE HAVE SEEN SO FAR. BRAND NEW FROM CAMPERCARE THESE REPLACEMENT LED UNITS GIVE OFF A CRISP WHITE LIGHT. LOW POWER CONSUMPTION AND EXCEPTIONAL LONG LIFE MEANS YOU CAN FIT AND FORGET. ALL THE LIGHT POWER NON OF THE DRAIN. Specifications. VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications ) NUMBER OF SMD : 9 LIGHT OUTPUT : 25 watts Cool White POWER CONSUMPTION : 1.2 Watt SWITCH : NO MOUNTING : SURFACE ROTATION : N/A DIMENSIONS OF LAMP : Max W BASE 90mm MAX L 250mm, D ( protruding from body ) 50mm