OEM (ORIGINAL MANUFACTURERS) DOWNLIGHTER BRUSHED STEEL COLOUR (Copy)
£32.99
OEM (ORIGINAL MANUFACTURERS EQUIPMENT), SUPERB LAMP WITH CLEAR PERSPEX COVER, BRUSHED STEEL COLOUR
NUMBER OF SMD : 3 CREE WARM WHITE
LIGHT OUTPUT : 28 watts
POWER CONSUMPTION : 2 Watt
SWITCH : YES
MOUNTING : SURFACE
ROTATION : NO
DIMENSIONS OF LAMP : MAX W 210mm D 38
OEM (ORIGINAL MANUFACTURERS EQUIPMENT), SUPERB LAMP WITH CLEAR PERSPEX COVER, BRUSHED STEEL COLOUR
NUMBER OF SMD : 3 CREE WARM WHITE
LIGHT OUTPUT : 28 watts
POWER CONSUMPTION : 2 Watt
SWITCH : YES
MOUNTING : SURFACE
ROTATION : NO
DIMENSIONS OF LAMP : MAX W 210mm D 38
REAR HI VIZ TURN INDICATOR LAMP
THESE AMBER LED LAMP UNITS WILL ENHANCE THE REAR OF AUTOTRAIL, SWIFT AND OTHER MAKES OF MOTORHOMES CARAVANS ETC THAT CURRENTLY USE THE HELLA CIRCULAR LAMP UNITS.
MOST MANUFACTURERS INSTALL JUST ONE LED LAMP UNIT AND USE A BLANKING UNIT FOR THE OTHER LAMPS. NOW YOU CAN ENHANCE THE REAR OF YOUR UNIT BY REPLACING THE BLANKS WITH OUR HIGH VISIBILITY AMBER TURN INDICATOR LAMP UNITS. WIRED TO YOUR EXISTING TURN INDICATOR LAMPS THESE UNITS WILL LOOK SUPERB !
FULLY CE MARKED AND SIMPLE TO WIRE WITH JUST 2 WIRES. ( INDICATOR , EARTH )
PIC SHOWS RED STOP/TAIL LAMP. TURN INDICATOR IS AMBER LEDs
STOP / TAIL LAMPS ALSO AVAILABLE SEE OUR OTHER LISTING. YOU ARE PURCHASING 1 x CIRCULAR LED LAMP UNIT.
DIMENSIONS : OUTER DIAMETER 98mm INNER DIAMETER 55mm DEPTH 20mm
CREE FLEX LG BRUSHED STEEL RECESSED 12v CREE
BRUSHED STEEL RECESSED MOUNTED LED LAMP CW 1 x SUPER BRIGHT CREE BULB
Specifications. VOLTAGE : 12 NUMBER OF SMD : 1 x SUPER BRIGHT CREE cool white LIGHT OUTPUT : 27 watts POWER CONSUMPTION : 1.3 Watt SWITCH : YES MOUNTING : RECESSED, DESIGNED TO FIT UNDER CUPBOARD OR REPLACE DOWNLIGHTER ETC ROTATION : 360 / 90 up/down DIMENSIONS OF LAMP : HOLE SIZE 50mm W BASE 70mm MAX H 200mm adjustable
ALUMINIUM ROTATING STRIP LAMP 35CM
LED DRIVER/TRANSFORMER 240v AC – 12v DC
REQUIRED TO DROP 240 VOLT AC to 12 VOLT DC FOR ALL LED BULBS.
STANDARD HALOGEN SWITCHED 12 VOLT TRANSFORMERS WILL NOT USUALLY OPERATE WITH LEDs DUE TO THE FACT THAT THE LED BULBS USE LESS THAN 10x THE POWER THAN THE HALOGEN BULBS, THE SWITCHED TRANSFORMERS NEED A HIGH 'LOAD' APPLYING TO THEM TO MAKE THEM SWITCH ON...... LEDs GIVE INSUFFICIENT LOAD.
THE LED DRIVER SWITCHES ON WITH MILLIAMPS LOAD AND GIVES A REGULATED 12 VOLT DC POWER SUPPLY.
Specifications. VOLTAGE : 240 VOLT AC INPUT - 12 VOLT DC OUTPUT NUMBER OF SMD : 12 VOLT OUTPUT : 12 watts ( will run up to 12 watts of LED bulbs ) POWER CONSUMPTION : DIMENSIONS : Max L 95mm W 40mm H 35mm