Check our Featured products!
-
T5F8 REPLACEMENT LED TUBE 12″….NO MODIFICATION REQUIRED EXCLUSIVE
£16.99DIRECT REPLACEMENT FOR 12" FLUORESCENT TUBE
NO MODIFICATION REQUIRED...WORKS WITH EXISTING BALLAST UNIT
A STANDARD FLUORESCENT TUBE USES OVER 2.5 X THE POWER CONSUMPTION.
Specifications. EXCLUSIVE TO US... DESIGNED AND MANUFACTURED TO OUR REQUIREMENTS.
VOLTAGE : WORKS WITH 12 VOLT FLUORESCENT LAMPS...NOT SUITABLE FOR GERMAN HYMER GROUP ( HYMER, BURSTNER NEISMANN BISCHOFF, FLAIR, GEIST )
NUMBER OF SMD : 30 day white
LIGHT OUTPUT : 35 watts ( approx 1.5x the light output of a conventional flourescent tube )
POWER CONSUMPTION : 3.5 Watt
DIMENSIONS : Max L 300mm 12" ( end of pin to end of pin )
-
MR11 9smd
£6.50DIRECT REPLACEMENT FOR THE 20 WATT MR11 HALOGEN BULB
Specifications.
VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )
NUMBER OF SMD : 9
LIGHT OUTPUT : 25 watts
POWER CONSUMPTION : 1.2 Watt
DIMENSIONS : Max W 35mm
-
GU10 240 VOLT DIMMABLE
£8.50DIRECT REPLACEMENT 240 VOLT GU10 DOWNLIGHTER BULB
AVAILABLE IN COOL WHITE AND WARM WHITE - DIMMABLE
Specifications. VOLTAGE : 220 - 240 VOLT NUMBER OF SMD : 3 x BRIDGELUX LIGHT OUTPUT : 45 WATTS POWER CONSUMPTION : 4 Watt DIMENSIONS : Max W 50mm -
CREE 2 BRUSHED STEEL 12v CREE
£21.99BRUSHED STEEL SURFACE MOUNTED LED LAMP C/W 1 x SUPER BRIGHT CREE BULB
Specifications. VOLTAGE : 12 NUMBER OF SMD : 1 x SUPER BRIGHT CREE cool white LIGHT OUTPUT : 25 watts POWER CONSUMPTION : 1.2 Watt SWITCH : YES MOUNTING : SURFACE ROTATION : 360 / 90 up/down DIMENSIONS OF LAMP : Max W BASE 60mm MAX H 100mm -
12smd LIGHT BOARD / AWNING BOARD
£9.50REPLACEMENT FOR AWNING / ANY LAMPS THAT UTILISE BA15s 1156 SINGLE CONTACT BULBS.
Specifications. SIMPLY REMOVE EXISTING BULB AND REPLACE USING STICKY PADS ( not supplied ) SUPER BRIGHT.
VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )
NUMBER OF SMD : 12
LIGHT OUTPUT : 25 watts
POWER CONSUMPTION : 1.2 Watt
DIMENSIONS : Max 40mm SQUARE
CABLE LENGTH 85mm
-
T10 CAPLESS WEDGE 501 STACK 5SMD BULB
£4.85T10 CAPLESS WEDGE 5SMD STACK BULB
Specifications. A BULB IDEAL FOR ALL APPLICATIONS GIVING LIGHT OFF 360 DEGREES
VOLTAGE : 12 VOLT
NUMBER OF SMD : 5 Cool White
LIGHT OUTPUT : 15 watts
POWER CONSUMPTION : 1 WATT
DIMENSIONS : Max W 8mm Max H 30mm ( from base to top )
-
G4 10SMD 360 DEGREE STACK BULB
£7.00DIRECT REPLACEMENT FOR THE 20 WATT G4 Bi PIN HORIZONTAL/ VERTICAL FITTING HALOGEN BULB
Specifications.
VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )
NUMBER OF SMD : 10
LIGHT OUTPUT : 28 watts ( gives light out 360 degrees around )
POWER CONSUMPTION : 1.3 Watt
DIMENSIONS : Max W 20mm
MAX H 25mm
-
BA15s 1156 SINGLE CONTACT 13smd BAYONET BULB
£7.00DIRECT REPLACEMENT FOR THE SINGLE CONTACT INDICATOR STYLE BULB THE REPLACEMENT FOR EYEBALL LAMPS ETC
Specifications.
VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )
NUMBER OF SMD : 13
LIGHT OUTPUT : 22 watts
POWER CONSUMPTION : 1.2 Watt
DIMENSIONS : Max W 20mm
Max L 50mm ( TIP TO TIP )
-
G4 6SMD HORIZONTAL
£5.50DIRECT REPLACEMENT FOR THE 10 WATT G4 Bi PIN HORIZONTAL FITTING HALOGEN BULB
Specifications.
VOLTAGE : 8 - 30 VOLTS ( suitable for all 12 volt and 24 volt applications )
NUMBER OF SMD : 6
LIGHT OUTPUT : 18 watts
POWER CONSUMPTION : 1 Watt
DIMENSIONS : Max W 25mm
-
LED DRIVER/TRANSFORMER 240v AC – 12v DC
£9.99REQUIRED TO DROP 240 VOLT AC to 12 VOLT DC FOR ALL LED BULBS.
STANDARD HALOGEN SWITCHED 12 VOLT TRANSFORMERS WILL NOT USUALLY OPERATE WITH LEDs DUE TO THE FACT THAT THE LED BULBS USE LESS THAN 10x THE POWER THAN THE HALOGEN BULBS, THE SWITCHED TRANSFORMERS NEED A HIGH 'LOAD' APPLYING TO THEM TO MAKE THEM SWITCH ON...... LEDs GIVE INSUFFICIENT LOAD.
THE LED DRIVER SWITCHES ON WITH MILLIAMPS LOAD AND GIVES A REGULATED 12 VOLT DC POWER SUPPLY.
Specifications. VOLTAGE : 240 VOLT AC INPUT - 12 VOLT DC OUTPUT NUMBER OF SMD : 12 VOLT OUTPUT : 12 watts ( will run up to 12 watts of LED bulbs ) POWER CONSUMPTION : DIMENSIONS : Max L 95mm W 40mm H 35mm